MYCALE ¹æ¹®À» ȯ¿µÇÕ´Ï´Ù.
  Ȩ > ¼¿·ºÅÍ/ºÐ¹è/ÁõÆø/½ÅÈ£ÄÁ¹öÅÍ > RGB(¸ð´ÏÅÍ) ¼¿·ºÅÍ/ºÐ¹è±â/ÁõÆø±â > ¸ÞÆ®¸¯½º RGB ½ºÀ§ÃÄ
ÀͽºÆ®·Ð (Extron) MVX 88 VGA A (8*8 ºñµð¿À,¿Àµð¿À)
Á¦Á¶È¸»ç Extron
ÆǸŰ¡°Ý 3,700,000¿ø
ƯÀÌ»çÇ× MVX 88 VGA A 8x8 VGA and Stereo Audio Matrix Switcher
±¸¸Å¼ö·®
EA
º»»óÇ°ÀÇ Å±׸¦ ³Ö¾îÁÖ¼¼¿ä ű׳ֱâ * Çѹø¿¡ ÇϳªÀÇ Å±׸¸ ³Ö¾îÁÖ¼¼¿ä
  • ¼îÇÎű×
    ´õº¸±â






»õ ÆäÀÌÁö 1




The MVX 88 VGA A is designed to route high resolution computer-video and stereo 
audio signals. Convenient 15-pin HD connectors are used for all computer-video 
input and output connections. Unbalanced stereo audio is input on 3.5 mm stereo 
mini jacks, while balanced or unbalanced stereo audio is output on captive screw 
connectors. Using pre-terminated cable assemblies, such as Extron's VGA with 
Audio Cables, eliminates crimping and makes installations faster and easier.

In addition, the MVX 88 VGA A comes standard with the QS-FPC¢â - QuickSwitch Front Panel Controller, which allows for touch-of-a-button input and output selection directly from the front panel. It can also be controlled through RS-232 serial control utilizing Extron's SIS¢â - Simple Instruction Set commands, the optional Extron IR 501 remote control, the optional Extron MKP 2000 or MKP 3000 X-Y remote control panels, or via a third party control system.

Features

MVX VGA A Series Matrix Switchers
Video
  Routing  
        MVX 44 VGA A   4 x 4 matrix
        MVX 48 VGA A   4 x 8 matrix
        MVX 84 VGA A   8 x 4 matrix
        MVX 88 VGA A   8 x 8 matrix
        MVX 128 VGA A   12 x 8 matrix
  Gain   Unity
  Bandwidth   300 MHz (-3 dB), fully loaded
  Crosstalk  
        MVX 128 VGA A   -80 dB @ 1 MHz, -55 dB @ 10 MHz, -37 dB @ 100 MHz
        All other models   <-60 dB nominal @ 10 MHz, <-39 dB @ 100 MHz
  Switching speed  
        MVX 128 VGA A   200 ms (max.)
        All other models   20 ms (max.)
Video input
  Number/signal type  
        MVX 44/48 VGA A   4 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level sync), S-video, composite video
        MVX 84/88 VGA A   8 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level sync), S-video, composite video
        MVX 128 VGA A   12 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level sync), S-video, composite video
  Connectors  
        MVX 44/48 VGA A   4 female 15-pin HD
        MVX 84/88 VGA A   8 female 15-pin HD
        MVX 128 VGA A   12 female 15-pin HD
  Nominal level   1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
  Minimum/maximum levels   Analog: 0.3 V to 2.0 Vp-p with no offset at unity gain
  Impedance   75 ohms
  Horizontal frequency   15 kHz to 145 kHz
  Vertical frequency   30 Hz to 170 Hz
  Return loss   <-40 dB @ 5 MHz
  DC offset (max. allowable)   1.5 V
Video output
  Number/signal type  
        MVX 44/84 VGA A   4 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level sync), S-video, composite video
        MVX 48/88/128 VGA A   8 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level sync), S-video, composite video
  Connectors   
        MVX 44/84 VGA A   4 female 15-pin HD
        MVX 48/88/128 VGA A   8 female 15-pin HD
  Nominal level   1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
  Minimum/maximum levels   0.3 V to 2.0 Vp-p (follows input)
  Impedance   75 ohms
  Return loss   <-40 dB @ 5 MHz
  DC offset (max. allowable)  
        MVX 128 VGA A   ¡¾5 mV with input at 0 offset
        All other models   <20 mV with input at 0 offset
  Switching type   Triple-Action¢â
Sync
  Input type   RGBHV, RGBS, RGsB, RsGsBs
  Output type   RGBHV, RGBS, RGsB, RsGsBs (follows input)
  Standards   Computer scan rates and also NTSC 3.58, NTSC 4.43, PAL, SECAM
  Input level   0.5 V to 5.0 Vp-p
  Output level   AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated
  Input impedance   510 ohms
  Output impedance   75 ohms
  Max. propagation delay  
        MVX 128 VGA A   30 ns nominal
        All other models   Horizontal: 90 ns nominal
Vertical: 160 ns nominal
  Max. rise/fall time   4 ns
  Polarity   Positive or negative (follows input)
Audio
  Routing  
        MVX 44 VGA A   4 x 4 stereo matrix
        MVX 48 VGA A   4 x 8 stereo matrix
        MVX 84 VGA A   8 x 4 stereo matrix
        MVX 88 VGA A   8 x 8 stereo matrix
        MVX 128 VGA A   12 x 8 stereo matrix
  Throughput gain  
        MVX 128 VGA A   Unbalanced output: -6 dB
Balanced output: 0 dB
        All other models   Adjustable. At default (when input gain is set to 0 dB and output level is set to "Pro"), overall gain is 12 dB for balanced output. The gain range is -6 dB to +22 dB for balanced output when the output level is set to "Pro".
  Frequency response   20 Hz to 20 kHz, ¡¾0.2 dB
  THD + Noise   0.05% @ 1 kHz, 0.3 % @ 20 kHz at nominal level
  S/N   >90 dB, balanced, at maximum output (unweighted)
  Crosstalk   <-65 dB @ 20 kHz, <-80 dB @ 1 kHz (fully loaded) or below 60 Hz
  Stereo channel separation   >80 dB @ 1 kHz, >55 dB @ 20 Hz to 20 kHz
  CMRR   >75 dB @ 20 Hz to 20 kHz
Audio input
  Number/signal type  
        MVX 44/48 VGA A   4 stereo, unbalanced
        MVX 84/88 VGA A   8 stereo, unbalanced
        MVX 128 VGA A   12 stereo, balanced or unbalanced
  Connectors  
        MVX 44/48 VGA A   4 female 3.5 mm stereo mini jacks: tip (L), ring (R), sleeve (GND)
        MVX 84/88 VGA A   8 female 3.5 mm stereo mini jacks: tip (L), ring (R), sleeve (GND)
        MVX 128 VGA A   (12) 3.5 mm captive screw connector, 5 pole
  Impedance  
        MVX 128 VGA A   >10k ohms unbalanced/balanced, DC coupled
        All other models   >18k ohms unbalanced, DC coupled
  Nominal level  
        MVX 128 VGA A   0 dBV, 0 dBu
        All other models   -10 dBV (316 mV) (default), but also compatible with +4 dBu (1.23 V), 0 dBu (0.775 V), ‑20 dBV (100 mV)
  Maximum level  
        MVX 128 VGA A   >+19.5 dBu (7.316 V), (balanced/unbalanced) at 0.01% THD+N
        All other models   >+12 dBV (4 V), (unbalanced) at 1% THD+N
  Input gain  
        MVX 128 VGA A   -18 dB to +24 dB, adjustable per input by RS-232/422, Ethernet, or front panel
        All other models   -18 dB to +10 dB, adjustable per input; default = 0 dB. (This is referenced to the internal bus signal level. It can be verified by measuring the unbalanced output when the output level is set to "Consumer".)
   NOTE    0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
  Output gain   0 dB unbalanced (consumer) or +12 dB balanced (pro), selectable;
default = +12 dB, balanced, when output level is set to "Pro"
  Number/signal type  
        MVX 44/84 VGA A   4 stereo, balanced/unbalanced
        MVX 48/88/128 VGA A   8 stereo, balanced/unbalanced
  Connectors   
        MVX 44/84 VGA A   (4) 3.5 mm captive screw connectors, 5 pole
        MVX 48/88/128 VGA A   (8) 3.5 mm captive screw connectors, 5 pole
  Impedance   50 ohms unbalanced, 100 ohms balanced
  Gain error   ¡¾0.1 dB channel to channel
  Nominal level (output volume range)  
        MVX 128 VGA A   0 to 64 (-98 dB to 0 dB) in 1 dB increments from steps 1 to 64, 35 dB increment from step 0 to 1
        All other models   +4 dBu (1.23 V) (default) balanced (pro), or
-10 dBV (316 mV) unbalanced (consumer), selectable
  Maximum level (Hi-Z)  
        MVX 128 VGA A   >+21 dBu, balanced or unbalanced, at 0.1% THD+N at default settings
        All other models   >+22 dBu, balanced; >+14 dBV, unbalanced at 1% THD+N at default settings
  Maximum level (600 ohm)  
        MVX 128 VGA A   >+15 dBm, balanced or unbalanced, at 0.1% THD+N at default settings
        All other models   >+20 dBu, balanced; >+12 dBV unbalanced at 1% THD+N at default settings

Control/remote — switcher
  Serial control port  
        MVX 128 VGA A   1 RS-232 or RS-422, 9-pin female D connector
        All other models   1 RS-232, 9-pin female D connector
  Baud rate and protocol  
        MVX 128 VGA A   9600 (default), 19200, 38400, 115200 baud (adjustable); 8 data bits, 1 stop bit, no parity
        All other models   9600, 8-bit, 1 stop bit, no parity
  Control pin configurations  
        MVX 128 VGA A   RS‑232: 2 = TX, 3 = RX, 5 = GND
RS‑422: 2 = TX-, 3 = RX-, 5 = GND, 7 = RX+, 8 = Tx+
        All other models   2 = TX, 3 = RX, 5 = GND, 9 = hardwired IR input
  IR controller module   IR 501 (optional remote control for MVX 44/48/84/88 VGA A models)
  Program control   Extron's control/configuration program for Windows¢ç
Extron's Simple Instruction Set (SIS¢â)
General
  Power   100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal, autoswitchable
  Temperature/humidity   Storage: -40 to +158 ¡ÆF (-40 to +70 ¡ÆC) / 10% to 90%, noncondensing
Operating: +32 to +122 ¡ÆF (0 to +50 ¡ÆC) / 10% to 90%, noncondensing
  Rack mount   Yes, with included brackets, part #70-077-03, or furniture mountable with an optional under-desk mounting bracket, part #70-222-01
  Enclosure type   Metal
  Enclosure dimensions  
        MVX 128 VGA A   3.5" H x 17.4" W x 9.4 D (2U high, full rack wide)
8.9 cm H x 44.2 cm W x 23.9 cm D
(Depth excludes connectors and knobs. Width excludes rack ears.)
        All other models   1.75" H x 17.4" W x 8.5" D (1U high, full rack wide)
4.4 cm H x 44.2 cm W x 21.6 cm D
(Depth excludes connectors and knobs. Width excludes rack ears.)
  Product weight  
        MVX 128 VGA A   21 lbs (9.5 kg)
        All other models   7.0 lbs (3.2 kg)
  Shipping weight  
        MVX 128 VGA A   25 lbs (12 kg)
        All other models   10 lbs (5 kg)
  Vibration   ISTA 1A in carton (International Safe Transit Association)
  Listings   UL, CUL
  Compliances   CE, FCC Class A, VCCI, AS/NZS, ICES
  MTBF   30,000 hours
  Warranty   3 years parts and labor
   NOTE    All nominal levels are at ¡¾10%
   NOTE    Specifications are subject to change without notice.
»õ ÆäÀÌÁö 1

* ÃÑ 0°³ÀÇ »ç¿ëÈıⰡ ÀÖ½À´Ï´Ù.   Æò±ÕÆòÁ¡ : ¡Ú¡Ú¡Ú¡Ú¡Ú
ÀÛ¼ºÀÚ »ç¿ëÈıâ ÀÛ¼ºÀÏ ÆòÁ¡
µî·ÏµÈ »ç¿ëÈıⰡ ¾ø½À´Ï´Ù.