The Extron P/2 DA8 and P/2 DA12 are VGA distribution amplifiers with eight and twelve outputs, respectively. Each unit accepts a single VGA input signal and actively splits it for distribution to multiple outputs. Offering 350 MHz (-3dB) of RGB video bandwidth, the P/2 DA8 and P/2 DA12 are compatible with VGA-QXGA graphic cards, projectors and flat panel displays. Outputs are individually buffered and amplified to help maintain the original signal integrity and eliminate noise interference. ID bits are routed to output one for local monitor support. P/2 DA models are ideal for use in applications where one computer-video signal needs to be routed to multiple displays, such as rental and staging, courtrooms, conference rooms, and training facilities. 
The P/2 DA8 and P/2 DA12 offer selectable input and output sync impedance. This provides better compatibility with a wide range of laptop types. These models also feature individual output muting via contact closure. This feature allows the user to mute any one or all outputs with simple pushbutton relay control, and eliminates the cost of an extra control system serial port. 
The P/2 DA8 A and P/2 DA12 A have all the features of the P/2 DA8 and P/2 DA12 and add eight-output and twelve-output stereo distribution amplifiers, respectively. Both feature active PC audio buffering which converts unbalanced PC audio to balanced, line level signals, eliminating noise over long cable runs. Unbalanced stereo audio is input on 3.5 mm stereo mini jacks, while balanced or unbalanced stereo audio is output on captive screw connectors. Using pre-terminated cable assemblies, such as Extron's VGA with Audio Cables, eliminates crimping and makes installations faster and easier. 

Features


350 MHz (-3dB) RGB video bandwidth, fully loaded — Provides optimum signal integrity at the highest computer-video resolutions. 

Compatible with VGA-QXGA resolutions 

DDC signals and ID bits routed to local monitor output — Maintains compatibility with Windows® Plug-and-Play local monitors. 

Individual output muting via contact closure — Mute any one or all outputs with simple pushbutton or relay control. 

Selectable input and output sync impedance — Sync impedance can be set for optimum compatibility with a wide range of laptop computers. 

Active PC audio buffering — Converts unbalanced PC audio to a balanced, line level signal, eliminating noise over long cable runs. 

Internal universal power supply 




P/2 DA8/12 Series



Video 

   Gain 
Unity

   Bandwidth 
350 MHz (-3 dB), fully loaded



Video input 

   Number/signal type 
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video

   Connectors 
(1) 15-pin HD female (optional Mac/VGA adapters are available)

   Nominal level 
1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

   Minimum/maximum levels 
Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain

   Impedance 
75 ohms

   Horizontal frequency 
15 kHz to 135 kHz

   Vertical frequency 
30 Hz to 150 Hz

   Return loss 
<-40 dB @ 5 MHz

   Input coupling 
DC



Video output 

   Number/signal type 
8 or 12 (depending on model) VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type)

   Connectors 
8 or 12 female 15-pin HD

   Nominal level 
1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

   Minimum/maximum levels 
0.3 V to 1.5 Vp-p (follows input)

   Impedance 
75 ohms

   Return loss 
<-40 dB @ 5 MHz

   DC offset 
±5 mV with input at 0 offset



Sync 

   Input type 
RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync

   Output type 
RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync (follows input)
Tri-level on Y, R-Y, B-Y channels (component video 720p, 1080i, 1080p)
Bi-level on Y channel (for all other component video rates)

   Input level 
1.8 V to 5.0 Vp-p

   Output level 
TTL: 5.0 Vp-p, unterminated

   Input impedance 
510 ohms

   Output impedance 
50 ohms

   Max. propagation delay 
60 ns

   Max. rise/fall time 
2 ns

   Polarity 
Positive or negative (follows input)



Audio  — audio (A) models only

   Gain 
Unbalanced output: 0 dB; balanced output: +6 dB

   Frequency response 
10 Hz to 20 kHz, ±0.2 dB

   THD + Noise 
0.03% @ 1 kHz at nominal level

   S/N 
>90 dB at maximum output (unweighted)

   Crosstalk 
<-45 dB @ 1 kHz

   Stereo channel separation 
>80 dB @ 1 kHz



Audio input  — audio (A) models only

   Number/signal type 
1 stereo, unbalanced

   Connectors 
(1) 3.5 mm mini audio jack (tip, ring, sleeve)

   Impedance 
>10 k ohms unbalanced, DC coupled

   Nominal level 
-10 dBV (316 mVrms)

   Maximum level 
+16 dBu, (unbalanced) at 1% THD+N





    NOTE    
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu



Audio output  — audio (A) models only

   Number/signal type 
8 or 12 (depending on model) stereo, balanced/unbalanced

   Connectors 
(8 or 12) 3.5 mm captive screw connectors, 5 pole

   Impedance 
50 ohms unbalanced, 100 ohms balanced

   Gain error 
±0.1 dB channel to channel

   Maximum level (Hi-Z) 
>+28 dBu balanced, >+20 dBV unbalanced at 1% THD+N

   Maximum level (600 ohm) 
>+21 dBm balanced, >+18 dBm unbalanced at 1% THD+N



Control/remote — distribution amplifier 

   Contact closure mute control 
(2) 3.5 mm captive screw connectors, 4 pole, and
(2) 3.5 mm captive screw connectors, 3 pole

   Contact closure pin configuration 


      8-output models 
A = mute all outputs, 1 = mute output 1, 2 = mute output 2, 3 = mute output 3,... 8 = mute output 8

      12-output models 
A = mute all outputs, 1 = mute output 1, 2 = mute output 2, 3 = mute output 3,... 12 = mute output 12



General 

   Power 
100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal

   Temperature/humidity 
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

   Cooling 
Convection, no vents

   Mounting 


      Rack mount 
Yes, with included brackets (MBD 149, part #70-077-03)

      Furniture mount 
Yes, with optional Under-Desk Mounting Kit (MBU 149, part #70-222-01)

   Enclosure type 
Metal

   Enclosure dimensions 
1.6" H x 17.4" W x 8.5" D (1U high, full rack wide)
(4.1 cm H x 44.2 cm W x 21.6 cm D)
(Depth excludes connectors.)

   Product weight 
6.0 lbs (2.7 kg)

   Shipping weight 
9 lbs (5 kg)

   Vibration 
ISTA 1A in carton (International Safe Transit Association)

   Regulatory compliance

      Safety 
CE, CUL, UL

      EMI/EMC 
CE, C-tick, FCC Class A, ICES, VCCI

   MTBF 
30,000 hours

   Warranty 
3 years parts and labor