1/4" B-GAUGE 형태로 금속의 하우징이고 처크형식으로 케이블을 견고히 고정해 주는 형태의 플러그

1/4" "B-Gauge"  type plugs. All metal design, chuck-type strain relief, no rivets, meets all prevailing
standards. These plugs are NOT compatible with standard 1/4" jacks (acc. EIA RS453) and patch
panels.

TECHNICAL DATA

Electrical
Rated current: depends on mating connector
Contact resistance: depends on mating connector
Insulation resistance - initial: > 2 G
- after damp heat test: = 1 G
Dielectric strength: 1 kV dc

Mechanical
Wiring: solder terminals
Wire size 1 mm/ AWG 18
- NP3CM: 0.5 mm/ AWG 20
Cable O.D.: 4 - 7 mm
Solderability: complies with IEC 68-2-20

Materials
Shell: Brass CuZn39Pb3, black / red coated
Insulation: PA 6.6 30% GR
Contacts NP3T*: CuZn39Pb3, 2  Ni (Su) plated
Contacts NP3CM-B (-R): Brass CuZn39Pb3
Chuck: POM 2/3